How to change the door handle of an interior door? Removing the door handle correctly Remove the door handle with the latch

There are two types of broken interior door handles. Most often, when you press the handle, it simply scrolls, the door latch does not react to movement and the door does not open. Less often, the spring inside breaks, the handle sags lifelessly and no longer returns to the horizontal position.

Whichever option you encounter, to solve the problem, the door handle must first be disassembled and removed. The sequence of work depends on the design and features of the device of a particular model. Therefore, before we begin describing the technology for removing and disassembling the handle, let's look at what parts it consists of.

Door handle design

The photo below shows the design of the simplest door handle.

The first is the handle itself (in our case, a push handle). A plastic ring is attached to it, which ensures a tight fit of the handle to the base. It is also called a “rosette”, decorative flange or strip. There is a return spring inside it, which guarantees the stability of the horizontal position of the handle.

The next two elements are the travel stop and the locking ring. Their task is to prevent the handle from scrolling further than the required trajectory. All these components are sequentially located on the rod (Square in the image) and secured with a locking screw. The rod, in turn, is inserted into the locking mechanism and drives the latch.

The next photo shows the disassembled handle on the socket with a slightly more complex design of some parts.

Having understood the names and purpose of each of the elements, let’s move on to the sequence of removing the handle from the door and disassembling it.

Step-by-step instructions for performing the work

1. First of all, remove the handle (indicated in the photo above). It is attached to the rod with a locking screw, or, in the simplest case, secured with a spring-loaded locking pin. We unscrew the screw with a screwdriver or a hexagon, depending on the shape of the groove on it. If we are dealing with a spring-loaded pin, then you need to press it inward with a nail and forcefully pull the handle away from the door.
2. By removing the handle, we gain access to the socket. If the mounting screws are visible on the socket, then by unscrewing them we can immediately remove it from the rod. But more often there will be a special overlay on top of the fasteners (a decorative flange - in the photo above it is labeled as a socket). It will have a groove where it meets the door, by which it can be pryed with a screwdriver and removed. Perhaps the trim just needs to be turned counterclockwise if it is held on by the thread. By removing the decorative trim we gain access to the mounting screws that secure the socket itself. Since access to them is open and nothing is in the way, they will be easy to unscrew with a screwdriver.

It happens that the socket, just like the handle in other designs, has a hole in the end: there is a spring-loaded pin in the recess. In this case, to remove the socket, you need to press on it with a nail, while simultaneously pulling the socket off the rod. If you find a hole, but there is no pin in it, this means that when installing the handle, the socket was turned around its axis and the pin is located somewhere else. You can find it by smoothly turning the socket with a nail inserted into the recess until the nail rests on the pin.

After disassembling the handle in the suggested sequence, you will be able to determine the exact design of your particular model. And based on its characteristics, draw conclusions about what exactly caused the breakdown and how to fix it.

Types of handles for interior doors

Door handles are sold in two types: “knob” and “rosette”. The handle of the knob is usually hollow and light, while the handle on the rosette is made of more massive materials and is usually non-hollow inside. Over time, when the spring mechanism wears out, the first structure may begin to wobble or even sag. The second is that it will last longer and be more comfortable to use. Accordingly, their prices differ: the most budget-friendly options are knob handles.

The shape of the handles is divided into rotary And push. The push button has a classic handle shape: when you press it, the door latch is hidden in the lock body and the door opens. The rotary handle has a ball shape, which makes it less noticeable. In addition to the difference in design, these two designs differ in features that are not obvious at first glance.

The rotary handle is more compact: it is more difficult to accidentally touch it when passing by the door. And if this happens, it will not be as painful as with a push handle. At the same time, using a ball-shaped pen every day with wet or oily hands from cream is very inconvenient - your hands slip. So, if used regularly on kitchen or bathroom doors, the push handle will create fewer problems for you.

Each room, be it a house, apartment or office, must have doors. This means that when arranging them, you won’t be able to ignore the moment of choosing fittings such as door handles for them. Let’s dwell in more detail on their types and selection criteria, but before you start choosing, it’s worth finding out how to remove the handle from a door: interior or entrance.

Quality

The main criterion when choosing a door handle is its quality. After all, it is used constantly, since with its help any door opens and closes. In addition, it plays an important aesthetic role in the interior of any room. In any hardware store you can find a large selection of door hardware, among which everyone will find what they need. Handles for interior and entrance doors differ not only in price and design, but also in the material used.

If there are often drafts in the room, we recommend purchasing a handle with a latch lock. This will help the door stay closed without you having to keep closing it. When choosing such a device, you should carefully check the mechanism for serviceability and smooth operation.

Device types

1. Push. The mechanism causes the lock latch to work when it is pressed. The tongue moves to the inside and an opening occurs. Opening such a lock is easy, so if security is important to you, then it is better to take a closer look at another option;
2. Stationary. A simple device with no moving parts. The role of such handles is decorative and they are quite suitable for interior doors, as can be seen in the photo;
3. Rotary. This is a kind of push-button model, which is most often used for the bathroom.

Main stages

Before you begin dismantling the handle, determine its design. It can be simple or with a snap mechanism. The former, in turn, are also divided into several types:

• secured on both sides with self-tapping screws;
• having a rod running through the entire canvas.

1. If the handle is attached to ordinary self-tapping screws, then you can use a screwdriver. Having removed it, you can easily understand what is causing the problem and whether it is possible to fix it;
2. You will have to tinker with the handle and rod. Try spinning the part while holding the second part of the part to prevent it from spinning. Having removed the part from one side, you can easily remove the second and take out the rod;
3. To remove the handle with a latch, you need to get rid of the screws holding the fittings, after which you will see how it is secured. Most often, a structure of this type contains a rod and a tongue movement structure. Remove the small rod with the cap and it can be easily removed.

Round designs

Start the process of removing the handle from the side where the locking key is missing:

• First, get rid of the decorative trim, to do this, press the stopper with a screwdriver and it will easily come off, as shown in the video;
• Unscrew the two screws that hold the parts of the handle and remove them;
• Now you can unscrew the screws holding the latch and remove it.

Interior door

If the damage is serious, then it is better not to save money and buy a new one. Let's begin the replacement process:

• Remove the fittings, taking into account its design and the rules described above;
• Clean the removed handle with sandpaper and take it to the store, where they will help you choose a similar model;
• Most often, handles with latches and a lock are purchased for replacement.

Entrance door

The most important thing is to determine the malfunction and then replace the handle on the front door. To do this, listen to our advice:

1. Using a screwdriver, remove the structure. To do this, unscrew the screws holding the lever on both sides of the door leaf, without touching the internal lock;
2. Use an adjustable wrench to help unscrew the device or lever. Continue twisting until you remove the rotating mechanism as shown in the photo;
3. Having taken out the handle, you can easily remove the spring and rotation mechanism.
4. Carefully inspect all the details on which the hard work depends. If the handle is loose, then you can easily see all these details without even disassembling it;
5. It is necessary to unscrew the retaining ring that holds the torsion spring and washer together;
6. If you did everything correctly, you can easily remove the upper washer located under the locking ring;
7. The cause of the failure may be the torsion spring. To check this, take it out and inspect it carefully. If this is indeed the reason, then buy a new one and replace it;
8. It is worth checking the torsion spring as well. To do this, unscrew it with a screwdriver. If it is difficult to unscrew, then this is good and indicates that it is tight enough and there is no need to change it.

Let's sum it up

Replacing the handle is necessary in two cases: breakage and installation of a new door. If you listen to our advice, you will not have any problems in any of the cases. The main thing is to be careful and not to rush, and you will probably succeed.

The main function of door handles is to open and close doors. In addition, aesthetically made fittings become a decoration of the door leaf and part of the interior of the room. Today, construction stores offer a wide range of different models, differing in shape, design, style, quality, material, and price.

To prevent doors from opening due to air fluctuations, door handles with a latch lock are used. There are several important requirements for such a mechanism, the main ones being versatility, serviceability, and ease of operation.

Types of Door Handles

By design, door handles are divided into three types:

Push. The peculiarity of this type of door handle is that the latch is driven by a certain amount of pressure on the door handle. In this case, the lock tongue moves into its inner (hidden) part, as a result of which the door opens with ease. Fittings of this type serve more of a decorative function, since such locks open with ease. For this reason, they are used to temporarily close doors.

Stationary. Such door handles are a common device that is installed in a door leaf that is not equipped with a movable mechanism. These handles can only be used to control the door. The most popular type of stationary handles are bracket handles. They are perfect for doors whose main purpose is to delimit space (interior doors). This element makes it possible to pull the door towards you when opening or perform the opposite movement - close the door.

The kit may also include door latches. But with the help of such a device, the door can only be opened if there is a roller latch. In this design, it is better to choose reliably and firmly installed products that can withstand force loads.

Knob handles. Basically, such fittings have a round shape, and are equipped with a twist lock inside. To open or close the door, you must turn the handle. Door products of this type are used for interior doors. Knob handles can also be installed on toilet and bathroom doors. If you need not just closing the door, but also restricting access, it is better to choose rotary handles with a latch or button located in the center, thanks to which you can lock the door from one side.

Door handle installation diagram

The main types of locking devices are:

Latch with lock Latch without locking
Latch with lock and key

For ease of use, the handles on the doors should be installed at such a height that when opening the person’s arm at the elbow is bent at a right angle. A distance of about 70 mm should be maintained from the edge of the door to the handle. The specific value is determined depending on the locking mechanism. .

If a problem is detected in the operation of the door handle, it is necessary to determine its cause. To do this, it must be removed. You can do the work yourself. You will need an adjustable wrench and a screwdriver.

How to disassemble a door handle

The door handle is disassembled in the following sequence:

1. Using a screwdriver, unscrew the screws holding the lever on both sides.
2. Pull the device out of the door.
3. Unscrew the lever using a wrench and remove the spring-wrapped rotary mechanism from the handle.
4. Carefully inspect all elements to determine the cause of the breakdown and further action.

You can disassemble a round door handle using a special key with a stop, a flat-head and Phillips screwdriver. The sequence of actions is as follows:

1. On the side where the key is missing, you need to pry up and remove the door handle trim with the latch (this is done using a flat-head screwdriver).
2. Press the opened stopper while simultaneously pulling the handle towards you - this way it can be easily removed.
3. Using a screwdriver, you need to open both screws and remove the two unscrewed parts of the round handle from the door.
4. The screws holding the latch are unscrewed, after which they can be pulled out of the door leaf.

How to remove a door handle

To remove the handle, you first need to find out what its design is: regular or with a snap mechanism.

How to remove a round handle

Replacing the handle

If a door handle breaks, it must be replaced with another one. First you need to inspect and determine the structure, and then carefully remove it from the door leaf. The layer of old paint must be removed and the surface treated with sandpaper. Then you can go to the store for the appropriate model.

When choosing a handle, you need to take into account all the features of the door: whether there are any putty holes left on it and whether new fittings can close them. Based on the chosen design, assembly is performed in the reverse order of the above described methods for removing the handles.

How to disassemble the door handle of an interior or kitchen door? Each of us may face this question sooner or later. Breakdown of this mechanism occurs due to its regular use. However, like any other mechanism, the door handle handle is designed for a certain number of jobs, after which the mechanism needs to be overhauled or replaced.

Various options for interior door handles

In this text, we will look at how to disassemble an interior door handle structure, and will clearly demonstrate the simplicity of this procedure, after which everyone can do it independently at home, having at hand a small set of tools and two hours of free time to disassemble such an element , like a handle mechanism. It is worth noting that there are currently many different door opening mechanisms, so let’s look at examples of disassembling the most popular and in demand models today.

Device diagram and door handle mechanism

In this case, we will begin the analysis of examples with the rules for disassembling an ordinary stationary handle, which does not have a push set and a mortise lock for a response cylinder. Here we need a flathead or Phillips screwdriver or a screwdriver with a bat. Let's look at an example of parsing a regular stationary handle:

Read also

Disassembling a door handle with a lock

In the case of a stationary handle, the entire disassembly consists of removing the decorative trim and unscrewing the fasteners. Next, a new mechanism or an old element with new fasteners is installed in its place.

Handle disassembly process

It is worth noting that replacing a stationary handle with a new mechanism requires additional manufacturing of the corresponding fitting grooves in the door leaf.

Disassembling a round handle with a rosette

A socket, as a rule, refers to a mechanism that allows you to lock a lock using a special small key on one side and an accessible thumb on the reverse. In this case, disassembling such a mechanism consists of the following steps:

If the handle requires repair or replacement of a certain mechanism, then you will have to completely disassemble the individual parts and find the cause of the malfunction.

Important. When disassembling a round handle with a rosette, all fastening elements must not be lost, otherwise you will not be able to assemble the mechanism together and install it in its original place after reassembling and replacing one of the parts.

Watch the video: door handle repair.

Disassembling the round knob handle

How to disassemble a round door handle-knob? This question interests many owners when moving into a new apartment, where door leaves with a non-removable handle mechanism are installed. In this case, to remove this element from the door leaf, as a rule, the following steps are performed:

An element such as a non-separable round handle is attached using conventional fastening bolts. The mechanism is made in such a way that no repair work will be carried out later, but a new cover will be purchased immediately and will take the place of the old handle.

It is worth noting that this process is associated with the purchase and replacement of a mechanism; otherwise, there is no point in removing and attempting to disassemble such an element.


Since the manufacturer did not provide options for repair and installation of the handle after repair in its original place.

The need to disassemble the door handle arises for several reasons. These include breakdowns, the presence of abrasions, the desire to change an element, and renovations that involve dramatic changes in the interior of the apartment. To understand how to remove a door handle, you must first decide on its type.

Before disassembling, find out what type of fittings are. It is divided into 3 categories: knobs (round), stationary and push. The latter are used everywhere. If you press the handle, the latch goes inward. Without pressure, the element is extended.

The mechanism is installed with mortise locks. On the outer part there are linings that protect the handle from damage. Removing accessories requires care. You need to know the location of the latch.

Round models are installed in rooms that can be locked from the inside (more often found in the bathroom). Made in the shape of a ball. The castle is located in the middle.

Important! The keyhole can only be opened with a key on one side. On the other there is a latch.

Stationary ones are held on the door leaf with self-tapping screws or self-tapping screws. They have roller latches. The fittings are made of strips with brackets.

Tools

The list varies depending on the type of fittings. If you make a list, it will include:

• hammer;
• marker;
• screwdriver;
• drill;
• chisel;
• roulette;
• cutter;
• drill;
• flat screwdriver.

The complexity of disassembly and the tools used depend on the type of fittings. Each type of handle is easy to disassemble if you follow the instructions.

Push

It is found in door panels located at the entrance to the room. A common cause of unusability is a broken door hinge. If you have such a problem, you need to know how to remove the door handle of an interior door.

Instructions:

1. If the fittings malfunction, unscrew the screws that hold the bar in place. Use pliers to pull the rod out by the protruding edge.
2. If the fittings cannot be removed, find a screw or pin. Press it and at the same time pull the handle towards you.

The new element is installed in the same way, only in reverse order.

Plastic

This type of handle is easier to remove than others. Find the bar that protects the mechanism. It is located under the handle. Rotate 90 degrees. There are screws at the bottom. Unscrew and remove the fittings. Buy a new one from the same company. The fasteners and holes must match.

Push button in the entrance doors

Such fittings have low reliability and a short service life. A lock is most often installed in the door leaf. If the latch is working properly, there is no need to change it.

The algorithm of actions is the same as when dismantling the hardware in the entrance doors. Unscrew the screw located in the canvas. Remove the pen. There is a connector in the bar. Carefully place the knife in the slot and lift up. Do not damage the bar; it is easily deformed. There are four screws under the bar. Unscrew them and remove the lock.

How to remove a door handle

The knob differs from the previous handle in the elements with which it is attached to the blade. There is no pin in the round one. It has a spring lock. A key is supplied with the door leaf. If you don't have a key, use a nail or other thin object. Press the spring element with the key.

When there is no access to the clamp, remove the flange. Pry it open with a knife. Then turn it 180 degrees. The spring element falls into the hole. At this time a characteristic sound will be heard. Press the locking element and pull it towards you. When you remove the flange you will see decorative screws.

Stationary

Made in the form of planks of the following types: staples, square, circle. Attached to the door leaf with screws. Installation on both sides is done on one rod. If you turn the handle on one side, you can see how it turns on the other.

To disassemble the fittings you need to unscrew the screws. They are located in the bar or handle. Then the fittings are removed.

How to remove a push door handlewith magnetic lock

The mechanism is installed in the door leaf, is silent, and has a long service life.

Attention! The push model is most often used in bedrooms and children's rooms.

Due to careless or prolonged use under the influence of a magnet, the latch becomes jammed or warped. To remove the fittings, do the following:

1. At the bottom of the bar, find the hex socket. Unscrew the base with a tool and leave it hanging.
2. There is a second hole in the moving part. Unscrew and remove the fittings.
3. Access to the rod axis will open. Repeat the steps on the other side of the door.
4. Unscrew the bolts from the main mount. Remove the handle.
5. Unscrew the lock from the end of the door leaf with a screwdriver. Take it off.

So, to remove the handle of an interior door, you first need to determine its type and prepare the necessary tools. Follow the instructions carefully. With due diligence, disassembling the handle will not be difficult.